Skip to content

Meters for the LITE range

Accessories for dynamic power control and integration with photovoltaic systems

Depending on the charger model and the functions to be implemented, each installation will require one accessory or another.

 

Dynamic power control

CURVE

CURVE

THREE-PHASE METER

Dynamic power control + Integration with photovoltaic generation

NOT APPLICABLE

SINGLE-PHASE/THREE-PHASE METER

THREE-PHASE METER

Dynamic power control

Curve

Curve

Three-phase metre

Dynamic power control + Integration with photovoltaic generation

Not applicable

Single-phase metre

Three-phase metre

Three-phase metre

Curve

The CURVE current metre is the accessory that enables dynamic power control in single-phase installationsLITE Zero and LITE Uno), allowing the charger to adapt the power delivered to the vehicle at all times to the instantaneous consumption of the home and the contracted power.

Main characteristics:

  • Maximum current: 63 A
  • Maximum measured cable cross-section: 25 mm2
  • Connection cable with charger: 2 x 1,5 mm2
  • Color: White

Single-phase metre

The SINGLE-PHASE METER is the accessory that makes possible the dynamic balance of power in single-phase installationsLITE Uno), allowing the charger to adapt the power delivered to the vehicle at each moment to the instantaneous consumption of the home and the contracted power, as well as the integration with solar generation.

Main characteristics:

  • Type of power supply: Single-phase
  • Maximum current: 100 A
  • Voltage: 230 V AC
  • Certification: MID
  • Maximum cable length: 1000 m

Three-phase metre

The THREE-PHASE METER is the accessory that makes possible the dynamic balance of power in three-phase installationsLITE Uno and LITE Kubo), allowing the charger to adapt the power delivered to the vehicle at each moment to the instantaneous consumption of the home and the contracted power, as well as the integration with solar generation.

Main characteristics:

  • Type of power supply: Three-phase
  • Maximum current: 100 A
  • Voltage: 3 x 220 / 400 V AC
  • Frequency: 45-60 Hz
  • Certification: MID
  • Maximum cable length: 1000 m

Looking for an installation service?

Fill in the form and we will put you in contact with an authorized company in your area.

"*" indicates required fields

Frequently asked questions about the LITE range of measuring accessories

What are the metreing accessories for LITE chargers?

The metreing accessories are devices that measure the consumption of the home and inform the charger in real time, allowing the charger to instantly modulate the charge of the electric vehicle so that the sum of the power demanded by the home and the car at any given moment never exceeds the contracted power.

What are the benefits of the metreing accessories on LITE chargers?

They help to optimize energy consumption, facilitate cost control, avoid exceeding the contracted power so as not to "blow the fuse" and allow configuring the load in solar or mixed mode in installations with solar panels.

How do I know which metre I need?

It will depend on the specific model of LITE charger you are going to install and whether the installation has photovoltaic generation. See the table at the top of this page to find the right accessory for you.

How are the metreing accessories installed on the LITE chargers?

Installation is simple and can be performed by authorized service personnel. In case of doubt, our after-sales team is available to provide support.

How can I get technical support for the metreing accessories?

You can contact our after-sales team to solve any technical question through the VELTIUM app or by writing to veltium.

Where can I buy the measuring accessories for LITE chargers?

The accessories, like the rest of our devices, are only available through authorized installation companies and distributors. If you are a professional installer and want to install our equipment, become a VELTIUM partner..